Petrochemical Equipment Safety Evaluation Indentation Tester - Full-Lifecycle Safety Evaluation
Model PMT-1000 provides full-lifecycle safety evaluation from PQR to in-service inspection. It outputs safety factor (yield/operating stress) for code compliance check. Portable and intrinsically safe, it supports petrochemical, energy, and aerospace industries with 1000 N max load and 100 Hz data acquisition.
Key Selling Points
- Full-Lifecycle Support: From PQR to in-service inspection, offers consistent data for asset integrity management.
- Safety Factor Output: Directly calculates safety factor (yield/operating stress) for code compliance verification.
- Intrinsic Safety: Designed for hazardous zones, complying with petrochemical site rules.
- Minor-Damage Testing: Indentation depth 60-120 μm preserves surface integrity.
- High Accuracy: 100 Hz data acquisition ensures precise measurements.
Technical Specifications
| Parameter | Value |
|---|
| Maximum load | 1000 N (Max) |
| Actuation range | 25 mm |
| Loading speed | 0.01~30 mm/min |
| Data acquisition rate | 100 Hz |
| Rated voltage of motor | 2.1 V |
| Rated current of motor | 3 A |
| Wired/wireless power | 220 V/24V |
| Testing range | Macro-scale |
| Indentation depth | 60~120 μm |
Models and Options
Standard PMT-1000 includes comprehensive software for lifecycle data management.
Materials and Structure
Made from cemented carbide, stainless steel, and aluminum alloy, ensuring long-term reliability.
Applications
Perfect for petrochemical industry, energy and power, wind power, aerospace, pharmaceutical, fine chemical, new energy/new materials, and pesticide manufacturing. Suitable for pressure vessels, piping, and special equipment.
Customization
Customize testing regimes and data integration with your CMMS or inspection software.
Case Study
A special inspection institute used PMT-1000 for 10 years, achieving stable operation and efficient results in minutes.
FAQ
What is the safety factor and how is it calculated?
Safety factor is yield stress divided by operating stress, indicating the margin of safety. The tester outputs this based on measured yield strength.
Can it be used for in-service inspection?
Yes, it is designed for in-service use without shutdown.
What is the maximum load?
1000 N.
Is it suitable for hazardous areas?
Yes, intrinsically safe.
What is the data acquisition rate?
100 Hz.
What kind of materials can it test?
Cemented carbide, stainless steel, aluminum alloy, and similar metals.
Inquiry Information
Contact Vincent Zhang at vincent_zhang@zhanghuayaoji.com or +86 181-1890-2332.
Image Filename and Alt Suggestions
Lifecycle evaluation
Hazardous zone use
Safety factor report
✓ Verified Elite Supplier